High-quality hand tools can last for years if properly cared for. Here are five tips to keep your tools in top condition:

1. Clean after every use – Wipe off dirt and grease to prevent rust.
2. Store properly – Use toolboxes or wall-mounted racks to keep tools organized.
3. Oil moving parts – Hinges, pliers, and wrenches benefit from occasional lubrication.
4. Avoid misuse – Do not use screwdrivers as pry bars or hammers.
5. Inspect regularly – Check for cracks, bent handles, or worn edges and replace if necessary.

Using a car jack safely is essential for DIY vehicle maintenance. Follow these steps:

1. Use on flat surfaces – Never lift a car on a slope or soft ground.
2. Check weight limits – Ensure the jack can handle your vehicle’s weight.
3. Engage parking brake – Prevent accidental movement.
4. Place jack under proper points – Consult your car manual.
5. Use jack stands – Never rely on the jack alone when working underneath.

Generators are reliable power sources if maintained correctly:

1. Change oil regularly – Prevent engine wear and ensure smooth operation.
2. Clean air filters – Keep debris away from the engine.
3. Check fuel lines – Replace cracked or damaged hoses immediately.
4. Run periodically – Even unused generators should run once a month.
5. Store safely – Keep in a dry, ventilated area to avoid corrosion.

Pressure washers keep outdoor spaces clean, but maintenance is key:

• Do flush with clean water after each use.
• Do remove debris from nozzles and filters.
• Don’t store water inside the pump during freezing temperatures.
• Don’t use harsh chemicals not recommended by the manufacturer.
  Regular care ensures longer life and better cleaning performance.

Electric lawn mowers are efficient and eco-friendly. Maximize their performance with these tips:

1. Charge before use – Always start with a full battery.
2. Mow regularly – Avoid cutting too much at once; maintain even growth.
3. Clean after mowing – Remove grass clippings from blades and deck.
4. Check blades – Sharpen or replace dull blades for clean cuts.
5. Store safely – Keep in a dry shed or garage to prevent rust and damage.